• Field Devices

    You are here: / Field Devices

Field Devices

Pressure Transmitter

  • Accuracy: ±0.2% accuracy for all calibrated spans is standard.
  • Output: Smart, 4-20mA with Hart 7 communication protocol
  • Power supply: 10.5 to 45 V DC at transmitter terminals.
  • Hazardous locations Approval: ATEX, IECEX, cCSAus.
  • Stability: ±0.2% of upper range limit (URL) for 10 years.

Differential Pressure Transmitter

  • Accuracy: ±0.065% accuracy for all elevated or suppressed calibration ranges without additional adjustments.
  • Output signal: 4-20 mA (linear or square root) with HART communica­tion protocol
  • Power supply: 10.5 to 45 V DC at transmitter terminals.
  • Hazardous locations Approval: ATEX, IECEX, cCSAus.
  • Stability:±0.1% of the URL for 10 years

RF Capacitance Level Transmitter

  • For Liquids upto 20 mtrs
  • Temperature: upto 200 degC
  • Pressure: Upto 10 bar
  • Exproof version available
  • Time delay 2 to 30 secs adjustable
  • Configurable relay output
  • Conforms to International Standards

Conductivity Level Switch

  • Suitable for all conductive liquids
  • Used for pump control
  • Status indication via LED available
  • Temperature: upto 80 degC
  • Configurable relay output
  • Conforms to International Standards

Vibration Tuning Fork Level Switch

  • Suitable for Solids less than 10mm size
  • 225mm standard insertion length
  • Standard relay output
  • Conforms to International Standards

Flow Indicating Totalizer / Transmitter

  • Dual functionality flow rate indication  &  8 digit flow totalizing User configurable flow rate range.
  • Field settable flow totalizing rate.
  • OPTIONS: Relay outputs, Retransmission output, Serial communication port with MODBUS protocol, Flameproof enclosure

Pressure Transmitter

  • SS316L diaphragm
  • High accuracy, Strong anti-interference, good long-term stability
  • Wide pressure range, can measure the absolute pressure, gauge pressure and sealed gauge pressure
  • Anti-vibration, shock resistance

Head Mounted Temperature Transmitter

  • Loop powered 4 to 20mA analog output USB configurable

4/ 8/ 16 Channel Scanner

  • Horizontal or Vertical version as per your panel design
  • Universal input mA / RTD / Volt / Thermocouples for each channel (factory set).
  • Control Output for each channel with indication
  • User configurable span for mA / Volt inputs.
  • Communication via RS485 / Ethernet port
  • Flameproof enclosure – Optional

Datalogger

  • Accepts Analog input mA / RTD / Volt / Thermocouple in steps of 4 channels.
  • Control Output for each channel, with indication
  • User configurable span for mA / Volt inputs.
  • Data logging and Printing
  • Pen drive interface – Optional
  • Serial communication via RS232

Signal Conveters

  • RS232 to RS485 converters
  • RS 485 to RS 485 repeaters
  • RS232/ RS485 to Ethernet converter

Process Indicators

  • 4 ½ Digit, ½ inch display.
  • Signal Re-transmission.
  • User configurable Span.
  • Serial Communication on RS485 with Modbus RTU protocol.

Single/ Dual Channel Process Controller